Process and dialogue module ecomatDisplay CR1074, CR1075, CR1076, CR1077
8
4 Installation
4.1 Mounting accessories
The device is supplied without mounting accessories�
Depending on the intended installation location and type of mounting, the following
mounting accessories are available:
●
EC0731, installation kit for panel mounting
●
EC1410���EC1414, RAM
®
mount system for surface mounting
You can find more information about the available accessories at:
www�ifm�com
4.2 General installation instructions
The following applies to all types of mounting:
The responsibility for the compliance with the requirements concerning
mounting of the device in the application with regard to shock, vibration,
acceleration and weight lies with the system creator�
The unit front withstands shock up to IK07 without damage�
NOTE!
Higher shock > IK07
> Damage possible
Protection rating and electrical protection might be impaired
►
If necessary, the system creator must take external measures
to protect the device depending on the requirements of the
corresponding application�
►
Replace damaged units� Otherwise the technical data and
safety will be no longer be guaranteed�
On the back, the pressure compensation element, the service cover and
the connector areas are to be protected by taking external measures, if
necessary�