Process and dialogue module ecomatDisplay CR1074, CR1075, CR1076, CR1077
10
4.2.2 Light sensor and status LED
The device is equipped with a light sensor� It is used to adapt the brightness and
the operating elements automatically to the ambient brightness conditions�
1
2
1: Light sensor
2: Status LED
►
Avoid construction measures that cover up the light sensor�
The status LED indicates the operating states of the device�
4.3 Panel mounting / control cabinet installation
4.3.1 Safety instructions for panel mounting / control cabinet installation
The indications concerning the operating temperature refer to both sides of
the installation surface�
The dimensions for the control panel cut-out are a basic prerequisite for the
requirements concerning electrical protection, fire protection and protection
rating of the device / system� However, this alone does not ensure
compliance with the requirements� See the following safety instructions�
They must be complied with for the risk assessment by the system creator
