UK
Process and dialogue module ecomatDisplay CR1058, CR1059
23
6.2 Getting started
►
Connect the device to the notebook/PC via the Ethernet interface�
►
Switch on the notebook/PC; check the IP settings of the notebook/PC and
change them if necessary�
Internet protocol: TCP/IP
IP address: 192.168.82.xxx (except for .247, s.a.)
Subnet mask: 255�255�255�0
Gateway IP address: 192�168�82�1
►
Switch on the operating voltage of the dialogue module�
> Shortly after switch-on of the unit the start image is shown for approx� 10 to 15
seconds� During this time booting is running in the background� After booting
the App Launcher is opened automatically�
6.3 Set-up
The set-up allows the setting of the device parameters directly via the local
display or the web interface of the device� Local set-up is started by selecting
the set-up button in the App Launcher�
While the App Launcher is shown, entering the device IP address (e�g�
192.168.82.247) via the connected web browser takes you to the web set-up.
After leaving the set-up a project can be loaded�
Libraries (.lib) are available for the use of the operating elements, interfaces
and other internal functions of the device� They have to be integrated into the
application program�
6.4 Required documentation
In addition to the CODESYS programming system, the following documents are
required for programming and set-up of the device:
●
Programming manual ecomatDisplay
Manuals as well as online help CODESYS and ecomatDisplay are available for
download on the internet: www�ifm�com