UK
Process and dialogue module ecomatDisplay CR1058, CR1059
15
4.4.1 Mounting steps
►
Screw the mounting plate to the back of the device�
Usable M5 thread depth: ≤ 8 mm
Tightening torque M5: 5
±0,5
Nm
►
Screw second mounting plate / ball of the selected RAM
®
Mount component on
suitable surface according to RAM
®
Mount indications�
38 (1,5")
56
62
6
38,1
30
5,3
Mounting plate with ball
Hole dimensions
Tightening torque: 5
±0,5
Nm
►
Slightly loosen the fastening screw of the mounting arm�
►
Place the mounting arm onto the balls and tighten the fastening screw�
4.5 Other installation types
Permissible installation types:
(→ 4.3 Panel mounting / control cabinet installation)
(→ 4.4 Surface mounting with RAM
All other installation types are in the sole responsibility of the system
creator�