Process and dialogue module ecomatDisplay CR1058, CR1059
12
CAUTION!
The use of the installation kit does not ensure the requirements
concerning the protection rating of the system with the installed device�
> Protection rating and electrical protection may be impaired
►
The system creator has to ensure the protection rating depending
on the requirements of his application, if necessary by means of
external precautions�
►
The responsibility for the protection rating of the system with the
installed device lies with the system creator�
4.3.2 Integration with installation kit
The installation kit enables horizontal, vertical or overhead mounting of the device
in a panel cutout.
This type of mounting is suited for materials with a thickness from 1 to 10 mm.
Longer set screws have to be used for material thicknesses >10 mm. They are not
supplied with the mounting accessories.
The fixing profile, spacers, M5 hexagon nuts, washers, M5 set screws and
damping strips required for mounting are supplied with the installation kit.
Fixing profile of the installation kit
Dialogue module with mounted installation kit
Use the fixing profile of the mounting kit only together with a suitable spacer
and the damping strip.
4.3.3 Panel cut-out
►
Make a cut-out�
105
165
4 x R6
Tolerances ± 0�5 mm
Panel cut-out