•
Edit
an existing configuration data file:
The selected configuration data file can be changed. Continue to the
dialogue page (page 27) and you can change the individual set-
tings of the configuration data file interactively step by step.
•
Rename
an existing configuration data file:
The name of the selected configuration data file can be changed.
•
Duplicate
an existing configuration data file:
By activating this button you will copy the selected configuration data file. A dia-
logue will open into which you can enter the name of the copied configuration
data file. The copy will be saved on the first available list place.
•
Delete
an existing configuration data file:
The selected configuration data file will be deleted. To be on the safe side you will
be asked via a dialogue if you really want to delete the configuration data file.
•
Load configuration:
When you have selected a free list place you can load a configuration data file
stored on your PC into the sensor. The name under which the configuration data
file is to be stored in the sensor can be entered into a dialogue window. The con-
figuration data file to be loaded by the PC will be selected in a file selection dia-
logue.
•
Save configuration:
The selected configuration data file is saved on your PC. The file name and folder
for the configuration data file to be stored can be indicated in a corresponding dia-
logue.
•
Monitor:
The sensor is set into the Monitor mode (see page 36) in which the results of the
evaluation can be monitored.
Set image quality
26
