Hardware Operations
1230B0049701
2-8
2.5
Power Supplies
This server is designed with two 700W power supplies. However, only one power supply
(which can support the whole server) will be shipped with the server. When the server is
equipped with dual power supply, the hot-swappable redundant function is provided. If one
power supply does not work, you can replace the failed power supply without powering off the
server, because the other one can take the place of the failed one.
The location of power supplies on the server chassis is shown below:
Figure 2-11 Location of Power Supplies
Reminder
Before you remove or install the power supply, please follow the step below:
Step 1: Make sure the server is not turned on or connected to the AC power. To power off
the server, see “2.1.1 Power Off”.
Step 2: Disconnect all necessary cable connections.
Summary of Contents for ISR2500-6
Page 3: ......
Page 103: ...Daughter Cards China RoHS Regulations Appendix...
