IESC ISR2500-6 User Manual Download Page 100

Page: 100 / 109

Cable Connections

1230B0049701

3-18

Connect one end of the system fan power cable to the system fan connector on the

system fan cage 2.

Connect the other end of the system fan power cable to the system fan connector on the

system fan cage 1.

Connect the connector (4-pin) of the system fan power cable to connector A (4-pin) of the

HDD backplane power cable.

Connect connector B (6-pin) of the HDD backplane power cable to the HDD power

connector from the power supply.

Figure 3-24 Connecting the System Fan Power Cable

The HDD backplane power cable contains three connectors. For better illustration,

they are marked as A, B and C in the following figure. The application of connectors A

and B are introduced in this subsection. For the usage of connector C, please refer to

“3.3.4 Backplane Power Cable”.

Summary of Contents for ISR2500-6














































































































Search results

Summary of Contents for ISR2500-6

Reviews:

Related manuals for ISR2500-6

Brands by name

Popular brands

IESC ISR2500-6, User Manual

Search results

Summary of Contents for ISR2500-6

Reviews:

Related manuals for ISR2500-6

Brands by name

Popular brands