Print More Materials, All For Application
— 45 —
is a little far from the platform, you can increase
the automatic leveling compensation parameters
to make the nozzle and platform closer to the
distance
As in the case of Figure 2.
The skirt lines are connected and fused into one
plane. This means that the distance between the
nozzle and the platform is more appropriate, and
such a skirt effectively increases the contact
surface between the model and the platform,
increasing the adhesion force.
Attention: If the nozzle is too close to the platform, there is no gap between the platform and the nozzle, it will lead to
nozzle extrusion without supplies, so printing with a good observation of the skirt can be very good to help us improve the
success rate of printing.