Print More Materials, All For Application
— 22 —
4.2 Load/Unload Filament
4.2.1 Load Filament
Step 1
1. Straighten the filament, cut the
filament to the tip
Step 2
1. Hang the filament into the
filament box
2. and press the extrusion clamp
on the end
3.
Keep feeding the filament until
it cannot be fed
Step 3
1.
Observe that the filament
reaches the front print head
Step 4
1.
If the material is stuck in the
middle of the pipe, the
connector at the right side of
the X-axis can be taken out
and fed in sections.
Step 5
1. After the filament is delivered
to the print head
2. Preheat temperature is applied
3. Click the downward extrusion
button
4. Wait for the material to flow
out of the nozzle
5.
Click to stop extrusion