Print More Materials, All For Application
— 26 —
4.4 Model Removal
Step 1
1.
Print the completed model as shown in the figure
Step 2
1.
Close the vacuum suction button and lift up the
outer end of the print base plate to slowly pull out
the base plate
Step 3
1.
Use the spatula to press firmly against the platform
and gently from the corners
2.
Insert the spatula into the bottom of the model and
cock the spatula
Step 4
1.
If the model is too large to shovel down on one side
2.
Start over from the other three corners until the
model is shoveled down