manualshive.com logo in svg

IEI Technology PCIE-9450, User Manual, Page: 81 / 232

Share
Download
IEI Technology PCIE-9450 User Manual Download Page 81

 

 

PCIE-9450 PICMG 1.3 CPU Card 

Page 61

5.2 Installation Considerations 

 

NOTE: 

The following installation notices and installation considerations should 

be read and understood before the PCIE-9450 is installed. All 

installation notices pertaining to the installation of the PCIE-9450 

should be strictly adhered to. Failing to adhere to these precautions 

may lead to severe damage of the PCIE-9450 and injury to the person 

installing the motherboard. 

5.2.1 Installation Notices 

 WARNING: 

The installation instructions described in this manual should be 

carefully followed in order to prevent damage to the PCIE-9450 and 

injury to the user.   

Before and during the installation please DO the following: 

 

Read the user manual

: 

o 

The user manual provides a complete description of the PCIE-9450 

installation instructions and configuration options. 

 

Wear an electrostatic discharge cuff (ESD)

: 

o 

Electronic components are easily damaged by ESD. Wearing an ESD cuff 

removes ESD from the body and helps prevent ESD damage. 

 

Place the PCIE-9450 on an antistatic pad

: 

o 

When installing or configuring the motherboard, place it on an antistatic 

pad. This helps to prevent potential ESD damage. 

 

Turn off all power to the PCIE-9450

: 

Summary of Contents for PCIE-9450









































































































































































































































Reviews:

No comments