manualshive.com logo in svg

IEI Technology PCIE-9450, User Manual, Page: 2 / 232

Share
Download
IEI Technology PCIE-9450 User Manual Download Page 2

   

 

Page ii

PCIE-9450 PICMG 1.3 CPU Card

Manual Conventions 

 WARNING! 

Warnings appear where overlooked details may cause damage to the equipment or result 

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. 

The word “warning” is written as “

WARNING

,” both capitalized and bold and is followed by 

text. The text is the warning message. A warning message is shown below: 

 WARNING: 

This is an example of a warning message. Failure to adhere to warning 

messages may result in permanent damage to the PCIE-9450 or 

personal injury to the user. Please take warning messages seriously. 

 

 CAUTION! 

Cautionary messages should also be heeded to help reduce the chance of losing data or 

damaging the PCIE-9450. Cautions are easy to recognize. The word “caution” is written 

as “

CAUTION

,” both capitalized and bold and is followed. The italicized text is the 

cautionary message. A caution message is shown below: 

 

 

 

Summary of Contents for PCIE-9450









































































































































































































































Reviews:

No comments