IEI Technology PCIE-9450 User Manual Download Page 112

Page: 112 / 232

PCIE-9450 PICMG 1.3 CPU Card

Page 92

to 6 storage devices. Some legacy OS do not support

this mode.

Legacy IDE Channels [PATA Pri, SATA Sec]

Use the

Legacy IDE Channels

option to determine how SATA channels and PATA

channels are ordered.

SATA Only

Enables SATA channels only.

PATA Pri, SATA Sec

EFAULT

Puts SATA channels behind PATA channels.

SATA Pri, PATA sec

Puts SATA channels before PATA channels.

PATA Only

Enables PATA channels only.

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the IDE Configuration menu:

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

The IDE Configuration menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 6.3.2.1

appear.

6.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Summary of Contents for PCIE-9450









































































































































































































































Search results

Summary of Contents for PCIE-9450

Reviews:

IEI Technology PCIE-9450, User Manual, Page: 112 / 232

Search results

Summary of Contents for PCIE-9450

Reviews: