IEI Technology PCIE-9450 User Manual Download Page 103

Page: 103 / 232

PCIE-9450 PICMG 1.3 CPU Card

Page 83

5.7.3 USB Connection

The external USB connector provides easier and quicker access to external USB devices.

The external USB connector is a standard connector and can easily be connected to other

USB devices.

Figure 5-18: USB Connector

5.7.4 VGA Monitor Connection

The PCIE-9450 has a single female DB-15 connector on the external peripheral interface

panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor

to the PCIE-9450, please follow the instructions below.

Step 1:

Locate the female DB-15 connector

. The location of the female DB-15

connector is shown in

Chapter 3

Step 2:

Align the VGA connector

. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 3:

Insert the VGA connector

Once the connectors are properly aligned with the

Summary of Contents for PCIE-9450









































































































































































































































Search results

Summary of Contents for PCIE-9450

Reviews:

IEI Technology PCIE-9450, User Manual, Page: 103 / 232

Search results

Summary of Contents for PCIE-9450

Reviews: