manualshive.com logo in svg

IEI Technology PCIE-9450, User Manual, Page: 135 / 232

Share
Download
IEI Technology PCIE-9450 User Manual Download Page 135

 

 

PCIE-9450 PICMG 1.3 CPU Card 

Page 115

 

Allocate IRQ to PCI VGA [Yes] 

Use the Allocate IRQ to PCI VGA option to restrict the system from giving the VGA 

adapter card an interrupt address. 

 

Yes D

EFAULT

 

Assigns an IRQ to a PCI VGA card if card requests IRQ 

 

No 

 

Does not assign IRQ to a PCI VGA card even if the card 

requests an IRQ 

 

Palette Snooping [Disabled] 

Use the 

Palette Snooping

 option to enable or disable the palette snooping function. 

 

Disabled D

EFAULT

 

Unless the VGA card manufacturer requires palette 

snooping to be enabled, this option should be disabled. 

 

Enabled 

 

PCI devices are informed that an ISA based Graphics 

device is installed in the system so the ISA based 

Graphics card functions correctly. This does not 

necessarily indicate a physical ISA adapter card. The 

graphics chipset can be mounted on a PCI card. Always 

check with the adapter card manual first, before 

modifying the default settings in the BIOS. 

 

PCI IDE BusMaster [Disabled] 

Use the 

PCI IDE BusMaster

 BIOS option to enable or prevent PCI IDE busmastering. 

 

Disabled D

EFAULT

 

Busmastering is prevented 

 

Enabled 

 

IDE controller on the PCI local bus has mastering 

capabilities 

 

Summary of Contents for PCIE-9450









































































































































































































































Reviews:

No comments