manualshive.com logo in svg

IEI Technology PCIE-9450, User Manual, Page: 41 / 232

Share
Download
IEI Technology PCIE-9450 User Manual Download Page 41

 

 

PCIE-9450 PICMG 1.3 CPU Card 

Page 21

 

PXE (Pre-boot Execution Environment) support 

 

USB booting support 

2.8.3 Super I/O Chipset 

The Winbond W83627THG Super I/O chipset is connected to the ICH7R southbridge 

through the LPC bus. Some of the features of the Winbond W83627THG chipset are listed 

below. 

 

LPC Interface 

 

PC98/2001, ACPI and LANDesk Compliant 

 

Hardware Monitor 

 

Fan Speed Controller 

 

+5V, 5VSB and 3.3V Power Supply 

 

Two 16C550 UARTs for serial port control 

 

One IEEE 1284 Parallel Port 

 

Floppy Disk Controller 

 

Keyboard Controller 

 

Watchdog Timer 

 

Serial IRQ Support 

Some of the Super I/O features are described in more detail below. 

2.8.3.1 Super I/O LPC Interface 

The LPC interface on the Super I/O complies with the Intel

®

 Low Pin Count Specification 

Rev. 1.1. The LPC interface supports both LDRQ# and SERIRQ protocols as well as PCI 

PME# interfaces. 

2.8.3.2 Super I/O 16C550 UARTs 

The onboard Super I/O has two integrated 16C550 UARTs that can support the following: 

 

Two standard serial ports 

 

IrDa 1.0 and ASKIR protocols 

Summary of Contents for PCIE-9450









































































































































































































































Reviews:

No comments