IEI Technology PCIE-9450 User Manual Download Page 121

Page: 121 / 232

PCIE-9450 PICMG 1.3 CPU Card

Page 101

378

Parallel Port I/O port address is 378

278

Parallel Port I/O port address is 278

3BC

Parallel Port I/O port address is 3BC

Parallel Port Mode [Normal]

Use the Parallel Port Mode option to select the mode the parallel port operates in.

Normal D

EFAULT

The normal parallel port mode is the standard mode for

parallel port operation.

EPP

The parallel port operates in the enhanced parallel port

mode (EPP). The EPP mode supports bi-directional

communication between the system and the parallel port

device and the transmission rates between the two are

much faster than the Normal mode.

ECP

The parallel port operates in the extended capabilities

port (ECP) mode. The ECP mode supports bi-directional

communication between the system and the parallel port

device and the transmission rates between the two are

much faster than the Normal mode

ECP+EPP

The parallel port is also compatible with both ECP and

EPP devices described above

Parallel Port IRQ [IRQ7]

Use the Parallel Port IRQ option to set the parallel port interrupt address.

IRQ5

IRQ5 is assigned as the parallel port interrupt address

IRQ7 D

EFAULT

IRQ7 is assigned as the parallel port interrupt address

Summary of Contents for PCIE-9450









































































































































































































































Search results

Summary of Contents for PCIE-9450

Reviews:

IEI Technology PCIE-9450, User Manual, Page: 121 / 232

Search results

Summary of Contents for PCIE-9450

Reviews: