manualshive.com logo in svg

IEI Technology PCIE-9450, User Manual, Page: 148 / 232

Share
Download
IEI Technology PCIE-9450 User Manual Download Page 148

 

 

PCIE-9450 PICMG 1.3 CPU Card

Page 128 

 

ASF Support [Enabled] 

Use the 

ASF Support

 option to control the 

Alert Standard Format

 (

ASF

) function. 

 

Auto 

 

The ASF controller is auto-detected, activated and allowed 

to communicate with a remote management server. 

 

Disabled D

EFAULT

 

The ASF controller is disabled. 

 

Enabled 

 

The ASF controller is activated and allowed to communicate 

with a remote management server. 

 

Onboard LAN1 Controller [Enabled] 

The 

Onboard LAN1 Controller 

option enables or disables the on-board LAN1. 

 

Auto 

 

The on-board LAN1 controller is automatically detected 

and enabled 

 

Enabled D

EFAULT

 

The on-board LAN1 controller is manually enabled 

 

Disabled 

 

The on-board LAN1 controller is manually disabled 

 

Onboard LAN2 Controller [Enabled] 

The 

Onboard LAN2 Controller 

option enables or disables the on-board LAN2. 

 

Auto 

 

The on-board LAN2 controller is automatically detected 

and enabled 

 

Enabled D

EFAULT

 

The on-board LAN2 controller is manually enabled 

 

Disabled 

 

The on-board LAN2 controller is manually disabled 

 

Audio Controller [Disabled] 

The 

Audio Controller 

option enables or disables the audio controller. 

Summary of Contents for PCIE-9450









































































































































































































































Reviews:

No comments