IEI Technology NOVA-GM45A User Manual Download Page 91

Page: 91 / 153

NOVA-GM45A Motherboard

Page 79

Step 2:

Align the connector.

Align the HDMI connector with the HDMI port. Make sure

the orientation of the connector is correct.

Figure 4-27: HDMI Connection

Step 3:

Insert the HDMI connector.

Gently insert the HDMI connector. The connector

should engage with a gentle push. If the connector does not insert easily, check

again that the connector is aligned correctly, and that the connector is being

inserted with the right way up.

Step 0:

4.10.2 LAN Connection

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1:

Locate the RJ-45 connectors

. The locations of the USB connectors are shown

Chapter 4

Summary of Contents for NOVA-GM45A


























































































































































Search results

Summary of Contents for NOVA-GM45A

Reviews:

IEI Technology NOVA-GM45A, User Manual, Page: 91 / 153

Search results

Summary of Contents for NOVA-GM45A

Reviews: