manualshive.com logo in svg

IEI Technology NOVA-GM45A, User Manual, Page: 27 / 153

Share
Download
IEI Technology NOVA-GM45A User Manual Download Page 27

 

 

NOVA-GM45A Motherboard 

Page 15 

3.1.2 Peripheral Interface Connectors 

The table below lists all the connectors on the board. 

Connector 

Type 

Label 

Audio connector 

10-pin box header 

AUDIO1 

ATX power control connector 

3-pin wafer 

ATXCTL1 

Battery connector 

2-pin wafer 

BAT1 

Digital I/O connector 

10-pin header 

DIO1 

DDR2 SO-DIMM socket 

200-pin socket 

DIMM1, DIMM2 

Fan connector (CPU) 

4-pin wafer 

CPU_FAN1 

Fan connector (system) 

3-pin wafer 

FAN1 

Front panel connector 

14-pin header 

F_PANEL1 

Keyboard/mouse connector 

6-pin header 

KB_MS1 

LVDS backlight connector 

5-pin header 

INVERTER1 

LVDS connector 

30-pin crimp 

LVDS1 

Parallel port connector 

26-pin header 

LPT1 

PC/104+ connector (PC/104 part) 

PC/104 

J1 & J2 

PC/104+ connector (PCI-104 part) 

PCI-104 

PC104_PLUS1 

PCI connector 

PCI 

PCI1 

PCIe Mini Card slot 

PCIe Mini 

CN4 

Power connector 

4-pin molex 

PWR1 

Programming port for LC4064 

8-pin header 

CN1 

SATA connectors 

SATA 

SATA1, SATA2, 

SATA3, SATA4 

SATA power connector 

4-pin wafer 

CN2, CN3 

SDVO connector 

45-pin flat cable 

CN17 

Serial port connector (COM1~COM4)

40-pin header 

COM 

Serial port (RS-232/422/485) 

14-pin header 

COM5, COM6 

Summary of Contents for NOVA-GM45A


























































































































































Reviews:

No comments