IEI Technology NOVA-GM45A, User Manual, Page: 65 / 153

NOVA-GM45A Motherboard
Page 53

Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.

Use the product before verifying all the cables and power connectors are
properly connected.

Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
The following checklist is provided to ensure the NOVA-GM45A is properly installed.

All the items in the packing list are present

A compatible memory module is properly inserted into the slot

The CF Type I or CF Type II card is properly installed into the CF socket

The jumpers have been properly configured

The NOVA-GM45A is inserted into a chassis with adequate ventilation

The correct power supply is being used

The following devices are properly connected
o
Primary and secondary IDE device
o
SATA drives
o
Power supply
o
USB cable
o
Serial port cable

The following external peripheral devices are properly connected to the
chassis:
o
VGA screen
o
Keyboard
o
Mouse
o
RS-232 serial communications device
o
USB devices
4.3 Unpacking
When the NOVA-GM45A is unpacked, please check all the unpacking list items listed in
Chapter 3 are indeed present. If any of the unpacking list items are not available please
contact the NOVA-GM45A vendor reseller/vendor where the NOVA-GM45A was
purchased or contact an IEI sales representative.