IEI Technology NOVA-GM45A User Manual Download Page 82

Page: 82 / 153

NOVA-GM45A Motherboard

Page 70

4.9.2 Audio Kit Installation

The Audio Kit that came with the NOVA-GM45A connects to the audio connector on the

NOVA-GM45A. The audio kit consists of three audio jacks. Mic-in connects to a

microphone. Line-in provides a stereo line-level input to connect to the output of an audio

device. Line-out, a stereo line-level output, connects to two amplified speakers. To install

the audio kit, please refer to the steps below:

Step 1:

Locate the audio connector

. The location of the 10-pin audio connector is

shown in

Chapter 3

Step 2:

Align pin 1

. Align pin 1 on the on-board connector with pin 1 on the audio kit

connector. Pin 1 on the audio kit connector is indicated with a white dot. See

Figure 4-16

Figure 4-16: Audio Kit Cable Connection

Step 3:

Connect the audio devices

. Connect speakers to the line-out audio jack.

Connect the output of an audio device to the line-in audio jack. Connect a

microphone to the mic-in audio jack.

Step 0:

Summary of Contents for NOVA-GM45A


























































































































































Search results

Summary of Contents for NOVA-GM45A

Reviews:

IEI Technology NOVA-GM45A, User Manual, Page: 82 / 153

Search results

Summary of Contents for NOVA-GM45A

Reviews: