manualshive.com logo in svg

IEI Technology NOVA-GM45A, User Manual, Page: 129 / 153

Share
Download
IEI Technology NOVA-GM45A User Manual Download Page 129

 

 

NOVA-GM45A Motherboard 

Page 117 

 

Change Supervisor Password 

Use the 

Change Supervisor Password

 to set or change a supervisor password. The 

default for this option is 

Not Installed

. If a supervisor password must be installed, select 

this field and enter the password. After the password has been added, 

Install

 appears 

next to 

Change Supervisor Password

. 

 

Change User Password 

Use the 

Change User Password

 to set or change a user password. The default for this 

option is 

Not Installed

. If a user password must be installed, select this field and enter the 

password. After the password has been added, 

Install

 appears next to 

Change User 

Password

. 

5.7 Chipset 

Use the 

Chipset

 menu (

BIOS Menu 21

) to access the Northbridge and Southbridge 

configuration menus 

 WARNING! 

Setting the wrong values for the Chipset BIOS selections in the Chipset 

BIOS menu may cause the system to malfunction. 

 

Summary of Contents for NOVA-GM45A


























































































































































Reviews:

No comments