IEI Technology NOVA-GM45A, User Manual, Page: 118 / 153

NOVA-GM45A Motherboard
Page 106

COM3 System is remotely accessed through COM3

COM4 System is remotely accessed through COM4
NOTE : Make sure the selected COM port is enabled through the Super I/O configuration
menu.

Base Address, IRQ [3E8h, A]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.

Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available

115200 8,n,1 D
EFAULT

57600 8,n,1

38400 8,n,1

19200 8,n,1

09600 8,n,1
NOTE:
Identical baud rate setting musts be set on the host (a management
computer running a terminal software) and the slave

Redirection After BIOS POST [Always]
Use the Redirection After BIOS POST option to specify when console redirection should
occur.

Disabled The console is not redirected after POST

Boot Loader Redirection is active during POST and during Boot
Loader