IEI Technology NOVA-GM45A User Manual Download Page 78

Page: 78 / 153

NOVA-GM45A Motherboard

Page 66

Figure 4-11: PC/104-Plus Voltage Setup Jumper Pinout Locations

4.8 Chassis Installation

4.8.1 Airflow

WARNING:

Airflow is critical to the cooling of the CPU and other onboard

components. The chassis in which the NOVA-GM45A must have air

vents to allow cool air to move into the system and hot air to move out.

The NOVA-GM45A must be installed in a chassis with ventilation holes on the sides

allowing airflow to travel through the heat sink surface. In a system with an individual

power supply unit, the cooling fan of a power supply can also help generate airflow

through the board surface.

4.8.2 Motherboard Installation

To install the NOVA-GM45A motherboard into the chassis please refer to the reference

material that came with the chassis.

4.9 Internal Peripheral Device Connections

This section outlines the installation of peripheral devices to the onboard connectors

Summary of Contents for NOVA-GM45A


























































































































































Search results

Summary of Contents for NOVA-GM45A

Reviews:

IEI Technology NOVA-GM45A, User Manual, Page: 78 / 153

Search results

Summary of Contents for NOVA-GM45A

Reviews: