44
Appendix D How to Use Wake-up Function
NOVA-7820 provides two kind of Wake up Function. This page describes how to
use Modem Wake-Up and LAN Wake-Up function.
Wake-Up function is working while you use ATX power supply.
Wake-Up By Ring:
You must set the option Power On By Ring of CMOS SETUP to be enabled. The
ATX power supply will be switched on when there is a ring signal detected on pin
“RI” of serial port.
Wake-Up On LAN:
When your computer is in power-down status, you can see LAN Link/Active LED is
flashing. This status indicates that the LAN chip has entered standby mode and
waits for Wake-Up signal. You can use other computers to wake up your
computer by sending ID to it.
ID: ID is the address of your system LAN. Every LAN chip has a factory, set ID,
which you can find it from network information in WINDOWS.
The format of ID is xxxxxxxxxxxx
Example ID: 009027388320