manualshive.com logo in svg

IEI Technology NOVA-7820, Manual, Page: 34 / 47

Share
Download
IEI Technology NOVA-7820 Manual Download Page 34

 34

 

FDC/LPT/COM Ports 

Enabling the option allows the IRQ input to be monitored for both 

inactivating for entering Auto_mode/SMI_mode and activating for entering 

Normal_mode. 

 

SB & MSS Audio Ports 

Enabling the option allows the IRQ input to be monitored for both 

inactivating for entering Auto_mode/SMI_mode and activating for entering 

Normal_mode. 

 

MIDI Ports 

Enabling the option allows the IRQ input to be monitored for both 

inactivating for entering Auto_mode/SMI_mode and activating for entering 

Normal_mode. 

 

ADLIB Ports 

Enabling the option allows the IRQ input to be monitored for both 

inactivating for entering Auto_mode/SMI_mode and activating for entering 

Normal_mode. 

 

Primary Master IDE 

Enabling the option allows the IRQ input to be monitored for both 

inactivating for entering Auto_mode/SMI_mode and activating for entering 

Normal_mode. 

 

Primary Slave IDE 

Enabling the option allows the IRQ input to be monitored for both 

inactivating for entering Auto_mode/SMI_mode and activating for entering 

Normal_mode. 

 

Secondary Master IDE 

Enabling the option allows the IRQ input to be monitored for both 

inactivating for entering Auto_mode/SMI_mode and activating for entering 

Normal_mode. 

 

Secondary Slave IDE 

Enabling the option allows the IRQ input to be monitored for both 

inactivating for entering Auto_mode/SMI_mode and activating for entering 

Normal_mode. 

 

Power Button Function 

This option specifies how the power button mounted externally on the 

computer chassis is used. 

 

Wake Up On Ring 

Ring Resume From Soft Off 

 

Wake Up On Lan 

LAN Resume From Soft Off 

 

Wake Up On PME 

PME# Resume From Soft Off 

 

Resume By Alarm 

When this option is set enabled, system will according to you set time then 

wakeup from soft off mode. 

Summary of Contents for NOVA-7820
















































Reviews:

No comments