36
devices. If disabled, BIOS will configure all devices.
Clear NVRAM on Every Boot
When this option is set to Yes, system can auto clear NVRAM.
PCI Latency Timer (PCI Clocks)
This option specifies the latency timings (in PCI clocks) for PCI devices
installed in the PCI expansion slots. The settings are 32, 64, 96, 128, 160,
192, 224, or 248.
PCI VGA Palette Snoop
If enable, PCI will allow VGA palette signals to go to the ISA bus.
Allocate IRQ to PCI VGA
Set this option to Yes to allocate an IRQ to the VGA device on the PCI bus.
The settings are Yes or No.
PCI Slot1/2/3/4 IRQ Priority
The option specifies the IRQ priority for PCI device installed in the PCI
expansion slot. The settings are Auto, (IRQ) 3, 4, 5, 7, 9, 10, and 11, in
priority order.
DMA Channel 0/1/3/5/6/7
The option allows you to specify the bus type used by each DMA channel.
The settings are PnP or ISA/EISA.
IRQ3/4/5/7/9/10/11/14/15
The option specifies the bus that the specified IRQ line is used on. The
option allows you to reserve IRQs for legacy ISA adapter cards. The option
determine if AMIBIOS should remove an IRQ from the pool of available
IRQs passed to devices that are configurable by the system BIOS. The
available IRQ pool is determined by reading the ESCD NVRAM. If more
IRQs must be removed from the pool, the end user can use the option to
reserve the IRQ by assigning an ISA/EISA setting to it. Onboard I/O is
configured by AMIBIOS. All IRQs used by onboard I/O are configured as
PCI/PnP.