IEI Technology NANO-LX User Manual Download Page 89

Page: 89 / 213

NANO-LX CPU Card

4.2 Unpacking

NOTE:

If any of the items listed below are missing when the NANO-LX CPU card is

unpacked, do not proceed with the installation and contact the reseller or

vendor from whom the CPU card was purchased.

4.2.1 Unpacking Precautions

Unpack the NANO-LX CPU card before installing it. Some components on the NANO-LX

are very sensitive to static electricity and can be damaged by a sudden rush of power.

Follow these precautions to protect the CPU card from damage:

Ground yourself to remove any static charge before touching the CPU

card by wearing a grounded wrist strap at all times or by frequently

touching any conducting material that is connected to the ground.

Handle the CPU card by its edges. Do not touch the IC chips, leads, or

circuitry if not necessary.

Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from

static discharge.

Summary of Contents for NANO-LX






















































































































































































































Search results

Summary of Contents for NANO-LX

Reviews:

Brands by name

Popular brands

IEI Technology NANO-LX, User Manual

Search results

Summary of Contents for NANO-LX

Reviews:

Brands by name

Popular brands