IEI Technology NANO-LX User Manual Download Page 113

Page: 113 / 213

NANO-LX CPU Card

113

NOTE:

To disable security, select the password setting in the Main Menu. When

asked to enter a password, don’t type anything, press

NTER

and the

security is disabled. Once the security is disabled, the system boots and

Setup

can be accessed.

OS Select For DRAM > 64MB [Non-OS2]

Use the

OS Select For DRAM > 64MB

option to specify the operating system.

Enabled

Specifies the operating system used as OS/2.

Disabled

(Default)

Select this option when not using the OS/2 operating

system.

Video BIOS Shadow [Enabled]

Use the

Video Bios Shadow

option to enable video BIOS to be copied to RAM.

Disabled

Video BIOS is not copied to RAM.

Enabled

(Default)

Video BIOS is copied to RAM.

XXXXX-YYYYY Shadow [Disabled]

Use the

XXXXX-YYYYY Shadow

option to write the contents of the ROM area

XXXXX-YYYYY to the same address in the system RAM.

Disabled

(Default)

Contents from ROM area XXXXX-YYYYY are not written

to the RAM.

Enabled

Contents from ROM area XXXXX-YYYYY are written to

the RAM.

Summary of Contents for NANO-LX






















































































































































































































Search results

Summary of Contents for NANO-LX

Reviews:

Brands by name

Popular brands

IEI Technology NANO-LX, User Manual

Search results

Summary of Contents for NANO-LX

Reviews:

Brands by name

Popular brands