manualshive.com logo in svg

IEI Technology NANO-LX, User Manual

Share
Download
IEI Technology NANO-LX User Manual Download Page 105

 

 

NANO-LX CPU Card

105

 

IDE HDD Auto-Detection [Press Enter] 

Use the 

IDE HDD Auto-Detection

 option to enable BIOS to automatically detect the IDE 

settings. Select 

IDE HDD Auto-Detection

 and press 

E

NTER

.

 BIOS automatically detects 

the HDD type. Do not set this option manually. 

 

IDE Primary Master [Auto] 

Use the 

IDE Primary Master

 option to activate or deactivate the following drive channels: 

 

Channel 0 Master 

 

Channel 0 Slave 

 

Channel 1 Master 

 

Channel 0 Slave 

 

 

None 

 

If no drives are connected to the IDE channel select this 

option. Once set, this IDE channel becomes 

inaccessible and any drives attached to it are 

undetected. 

 

Auto 

(Default) 

Setting this option allows the device to be automatically 

detected by the BIOS. 

 

Manual 

 

Selecting this option allows manual configuration of the 

device on the IDE channel in BIOS. 

 

Access Mode [Auto] 

The 

Access Mode

 option can only be configured if the 

IDE Primary Master

 is set to either 

Manual 

or 

Auto

. Use the 

Access Mode

 option to determine the hard disk BIOS translation 

modes. Most systems now use hard drives with large capacities and therefore either the 

LBA translation mode or auto mode should be selected. 

 

CHS 

 

Select this mode if the HDD capacity is less than 504MB.

Summary of Contents for NANO-LX






















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands