IEI Technology NANO-LX User Manual Download Page 140

Page: 140 / 213

140

IEI

Technology, Corp

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product and

is subject to change without prior notice. You may visit the IEI website or

contact technical support for the latest updates.

The NANO-LX CPU card has five software drivers:

VGA Driver

Audio Driver

LAN Driver

SATA/RAID Driver

ISA Driver

All five drivers can be found on the CD that came with the CPU card. To install the drivers

please follow the instructions in the sections below.

Insert the CD into the system that contains the NANO-LX CPU card.

NOTE:

If your system does not run the "autorun" program when the CD is inserted, click

the

Start

button, select

Run

, then type

X:\autorun.exe

(replace

with the actual

drive letter for your CD-ROM) to access the

IEI Driver CD

main menu.

Step 1:

From the AMD LX/GX Driver CD main menu (

Figure 6-1

), click

NANO-LX

Summary of Contents for NANO-LX






















































































































































































































Search results

Summary of Contents for NANO-LX

Reviews:

Brands by name

Popular brands

IEI Technology NANO-LX, User Manual

Search results

Summary of Contents for NANO-LX

Reviews:

Brands by name

Popular brands