IEI Technology NANO-LX User Manual Download Page 125

Page: 125 / 213

NANO-LX CPU Card

125

Onboard Parallel Port [378/IRQ7]

Use the

Onboard Parallel Port

option to specify a logical LPT port address and

corresponding interrupt for the physical parallel port. The

Onboard Parallel Port

options

are:

Disabled

378/IRQ7 (Default)

278/IRQ5

3BC/IRQ7

Parallel Port Mode [SPP]

Use the

Parallel Port Mode

option to select parallel port operation mode.

SPP

(Default)

The parallel port operates in the standard parallel port

(SPP) mode. This parallel port mode works with most

parallel port devices but is slow.

EPP

The parallel port operates in the enhanced parallel port

mode (EPP). The EPP mode supports bi-directional

communication between the system and the parallel port

device and the transmission rates between the two are

much faster than the SPP mode.

ECP

The parallel port operates in the extended capabilities

port (ECP) mode. The ECP mode supports bi-directional

communication between the system and the parallel port

device and the transmission rates between the two are

much faster than the SPP mode.

ECP+EPP

The parallel port is compatible with both ECP and EPP

devices.

Normal

Summary of Contents for NANO-LX






















































































































































































































Search results

Summary of Contents for NANO-LX

Reviews:

Brands by name

Popular brands

IEI Technology NANO-LX, User Manual

Search results

Summary of Contents for NANO-LX

Reviews:

Brands by name

Popular brands