IEI Technology NANO-LX, User Manual

Page: 88 / 213

88 IEI
®
Technology, Corp .
4.1 Installation Considerations
NOTE:
The following installation notices and installation considerations should be
read and understood before the CPU card is installed. All installation notices
pertaining to the installation of the CPU card should be strictly adhered to.
Failing to adhere to these precautions may lead to severe damage of the CPU
card and injury to the person installing the CPU card.
4.1.1 Installation Notices
Before and during the installation of the NANO-LX CPU card:
Read the user manual
o
The user manual provides a complete description of the NANO-LX
CPU card, installation instructions and configuration options.
Wear an electrostatic discharge cuff (ESD)
o
Electronic components are easily damaged by ESD. Wearing an ESD
cuff will remove ESD from your body and help to prevent ESD
damage.
Place the CPU card on an antistatic pad
o
When installing or configuring the CPU card, place it on an antistatic
pad. This will help to prevent potential ESD damage.
Turn off all power to the NANO-LX CPU card
o
When working with the CPU card, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the
system.
Before and during the installation of the NANO-LX CPU card,
DO NOT
:
Remove any of the stickers from the PCB. These stickers are required for
warranty validation.
Use the product before you have verified that all cables and power
connectors are properly connected.
Allow screws to contact the PCB, connector pins, or its components.