manualshive.com logo in svg

IEI Technology NANO-945GSE2, User Manual

Share
Download
IEI Technology NANO-945GSE2 User Manual Download Page 81

 

 

NANO-945GSE2 

Page 67

4.8.1 LAN Connection (Single Connector)   

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection 

to an external network. To connect a LAN cable with an RJ-45 connector, please follow 

the instructions below. 

Step 1: 

Locate the RJ-45 connectors

. The locations of the USB connectors are shown 

in 

Chapter 4

. 

Step 2: 

Align the connectors. 

Align the RJ-45 connector on the LAN cable with one of 

the RJ-45 connectors on the NANO-945GSE2. See 

7

Figure 4-19

. 

Figure 4-19: LAN Connection 

Step 3: 

Insert the LAN cable RJ-45 connector.

 Once aligned, gently insert the LAN 

cable RJ-45 connector into the onboard RJ-45 connector.

 

Step 0:

 

4.8.2 PS/2 Y-Cable Connection 

The NANO-945GSE2 has a PS/2 connector on the external peripheral interface panel. 

The dual PS/2 connector is connected to the PS/2 Y-cable that came with the 

NANO-945GSE2. One of the PS/2 cables is connected to a keyboard and the other to a 

Summary of Contents for NANO-945GSE2













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands