IEI Technology NANO-945GSE2 User Manual Download Page 101

Page: 101 / 172

NANO-945GSE2

Page 87

CPU Temp. Limit of OFF [000]

WARNING:

Setting this value too high may cause the fan to stop when the CPU is

at a high temperature and therefore cause the system to be damaged.

The

CPU Temp. Limit of OFF

option can only be set if the

CPU FAN Mode Setting

option is set to

Automatic Mode

. Use the

CPU Temp. Limit of OFF

option to select the

CPU temperature at which the cooling fan should automatically turn off. To select a value,

select the

CPU Temp. Limit of OFF

option and enter a decimal number between 000 and

127. The temperature range is specified below.

Minimum Value: 0°C

Maximum Value: 127°C

CPU Temp. Limit of Start [020]

WARNING:

Setting this value too high may cause the fan to start only when the

CPU is at a high temperature and therefore cause the system to be

damaged.

The

CPU Temp. Limit of Start

option can only be set if the

CPU FAN Mode Setting

option is set to

Automatic Mode

. Use the

CPU Temp. Limit of Start

option to select the

CPU temperature at which the cooling fan should automatically turn on. When the fan

starts, it rotates using the starting pulse width modulation (PWM) specified in the

Fan 3

Start PWM

option below. To select a value, select the

CPU Temp. Limit of Start

option

and enter a decimal number between 000 and 127. The temperature range is specified

below.

Minimum Value: 0°C

Maximum Value: 127°C

Summary of Contents for NANO-945GSE2













































































































































































Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands

IEI Technology NANO-945GSE2, User Manual

Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands