IEI Technology NANO-945GSE2 User Manual Download Page 24

Page: 24 / 172

NANO-945GSE2

Page 10

2.3 Unpacking Checklist

NOTE:

If any of the components listed in the checklist below are missing, do

not proceed with the installation. Contact the IEI reseller or vendor the

NANO-945GSE2 was purchased from or contact an IEI sales

representative directly by sending an email to

[email protected]

2.3.1 Package Contents

The NANO-945GSE2 is shipped with the following components:

Quantity

Item and Part Number

Image

1 NANO-945GSE2

1 Audio

cable

(

: 32000-072100-RS)

2 SATA

cable

(

P/N

: 32000-062800-RS)

1 KB/MS

PS/2

Y-cable

(

P/N

: 32000-000138-RS)

AT 12V Cable

(

P/N

: 32100-087100-RS)

RS-232 cable (without bracket)

(

P/N

: 32200-000049-RS)

Summary of Contents for NANO-945GSE2













































































































































































Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands

IEI Technology NANO-945GSE2, User Manual

Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands