IEI Technology NANO-945GSE2 User Manual Download Page 116

Page: 116 / 172

NANO-945GSE2

Page 102

Lock LED light on the keyboard is lit.

Boot From LAN Support [Disabled]

The

BOOT From LAN Support

option enables the system to be booted from a remote

system.

Disabled D

EFAULT

Cannot be booted from a remote system through the

LAN

Enabled D

EFAULT

Can be booted from a remote system through the

LAN

5.5.2 Boot Device Priority

Use the

Boot Device Priority

menu (

887H790H

BIOS Menu 16

) to specify the boot sequence from

the available devices. The following options are available:

Boot Device

BIOS Menu 16: Boot Device Priority Settings

5.6 Security

Use the Security menu (

888H791H

BIOS Menu 17) to set system and user passwords.

Summary of Contents for NANO-945GSE2













































































































































































Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands

IEI Technology NANO-945GSE2, User Manual

Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands