IEI Technology NANO-945GSE2 User Manual Download Page 69

Page: 69 / 172

NANO-945GSE2

Page 55

Figure 4-8:COM2 Function Select Jumper Location

4.6 Chassis Installation

4.6.1 Airflow

WARNING:

Airflow is critical to the cooling of the CPU and other onboard

components. The chassis in which the NANO-945GSE2 must have air

vents to allow cool air to move into the system and hot air to move out.

The NANO-945GSE2 must be installed in a chassis with ventilation holes on the sides

allowing airflow to travel through the heat sink surface. In a system with an individual

power supply unit, the cooling fan of a power supply can also help generate airflow

through the board surface.

NOTE:

IEI has a wide range of backplanes available. Please contact your

NANO-945GSE2 vendor, reseller or an IEI sales representative at

Summary of Contents for NANO-945GSE2













































































































































































Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands

IEI Technology NANO-945GSE2, User Manual

Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands