IEI Technology NANO-945GSE2 User Manual Download Page 167

Page: 167 / 172

NANO-945GSE2

Page 153

NOTE:

The compatible items described here have been tested by the IEI R&D

team and found to be compatible with the NANO-945GSE2

E.1 Compatible Operating Systems

The following operating systems have been successfully run on the NANO-945GSE2.

MS-DOS

6.22

Microsoft Windows XP (32-bit)

Microsoft Windows XPE-POS (32-bit)

Microsoft Windows 2000/SP4

Microsoft Vista Ultimate (32-bit)

Mardriva 2008/Mardriva 2006

Ubuntu

8.04

openSuSE

11.0

Fedora

QNX

6.2.1

E.2 Compatible Processors

The following Intel® Socket 478 processors have been successfully tested on the

NANO-945GSE2

CPU

FSB

Frequency

L2 Cache

Intel® Atom™ CPU N270

533 MHz

1.6 GHz

512 KB

Table E-1: Compatible Processors

Summary of Contents for NANO-945GSE2













































































































































































Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands

IEI Technology NANO-945GSE2, User Manual

Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands