IEI Technology KINO-690AM2 User Manual Download Page 94

Page: 94 / 226

KINO-690AM2 Mini-ITX Motherboard

5.4 CPU, CPU Cooling Kit and DIMM Installation

WARNING:

A CPU should never be turned on without the specified cooling kit

being installed. If the cooling kit (heat sink and fan) is not properly

installed and the system turned on, permanent damage to the CPU,

KINO-690AM2 and other electronic components attached to the

system may be incurred. Running a CPU without a cooling kit may also

result in injury to the user.

The CPU, CPU cooling kit and DIMM are the most critical components of the

KINO-690AM2. If one of these components is not installed the KINO-690AM2 cannot run.

5.4.1 AMD Socket AM2 CPU Installation

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

To install a socket AM2 CPU onto the KINO-690AM2, follow the steps below:

WARNING:

When handling the CPU, only hold it on the sides. DO NOT touch the

pins at the bottom of the CPU.

Page 74

Summary of Contents for KINO-690AM2



































































































































































































































Search results

Summary of Contents for KINO-690AM2

Reviews:

Brands by name

Popular brands

IEI Technology KINO-690AM2, User Manual

Search results

Summary of Contents for KINO-690AM2

Reviews:

Brands by name

Popular brands