manualshive.com logo in svg

IEI Technology KINO-690AM2, User Manual

Share
Download
IEI Technology KINO-690AM2 User Manual Download Page 219

 

KINO-690AM2 Mini-ITX Motherboard 

 

Figure F-3: RAID Configuration Options 

Step 9: 

Configure the RAID. 

Use the configuration options in the 

RAID Configuration 

Options

 menu shown above to configure the RAID. 

Step 10: 

Select the RAID Mode.

 The following RAID configuration options are available. 

 

JBOD 

 

RAID 0 

 

RAID 1 

 

RAID 10 

Step 11: 

Select the stripe block

. If necessary, select the stripe block. 

Step 12: 

Select the drives

. For a logical drive, at least two drives must be selected. 

Step 13: 

Select the Capacity

. For each drive, select the capacity of the drive that should 

be allocated to the logical drive. 

Step 14: 

Assign the drive

. For each drive, select “Y” in the assignment option. 

Step 15: 

Save

. Press “Ctrl-Y” to save the RAID configuration settings. 

Step 16: 

 The 

LD Define

 screen reappears with the newly configured LD showing. 

 

Page 199

Summary of Contents for KINO-690AM2



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands