IEI Technology KINO-690AM2 User Manual Download Page 37

Page: 37 / 226

KINO-690AM2 Mini-ITX Motherboard

2.4.4 Display Support

The AMD 690G supports dual independent displays. The following display interface

connectors are on the KINO-690AM2:

TV Out

DVI-D

VGA

2.4.4.1 TV Out

TV Out features include:

Integrated TV encoder from Xilleon products with integrated Avivo™

Supports Macrovision 7.1 copy protection standard (required by DVD players)

Supports the formats of component, composite and S-video outputs

2.4.4.2 Multiple Display Features

The Multiple display features include

Dual independent displays including one digital output

Resolution, refresh rates, and display data can be completely independent for

the two display paths

Supports both interlaced and non-interlaced displays

2.4.4.3 DVI

DVI support features include:

Supports a TMDS interface, enabling DVI <1650 Mbps/channel with 165 MHz

pixel clock rate per link

HDCP 1.1 support on data stream with on-chip key storage

Page 17

Summary of Contents for KINO-690AM2



































































































































































































































Search results

Summary of Contents for KINO-690AM2

Reviews:

Brands by name

Popular brands

IEI Technology KINO-690AM2, User Manual

Search results

Summary of Contents for KINO-690AM2

Reviews:

Brands by name

Popular brands