IEI Technology KINO-690AM2, User Manual

Page: 112 / 226

KINO-690AM2 Mini-ITX Motherboard
Chapter 2 .
Step 2: Align the DVI connector . Align the male DVI connector on the digital display
device cable with the female DVI connector on the external peripheral interface.
Step 3: Insert the DVI connector . Once the connectors are properly aligned with the
male connector, insert the male connector from the digital display device into the
female connector on the KINO-690AM2. See Figure 5-15 .
Figure 5-15: DVI Connector
Step 4: Secure the connector. Secure the DVI connector from the digital display device
to the external interface by tightening the two retention screws on either side of
the connector. Step 0:
5.8.3 LAN Connection (Single Connector)
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Page 92