IEI Technology KINO-690AM2 User Manual Download Page 127

Page: 127 / 226

KINO-690AM2 Mini-ITX Motherboard

Slave)

DE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the

IDE Configuration

menu:

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

The

IDE Configuration

menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 6.3.2.1

appear.

6.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Page 107

Summary of Contents for KINO-690AM2



































































































































































































































Search results

Summary of Contents for KINO-690AM2

Reviews:

Brands by name

Popular brands

IEI Technology KINO-690AM2, User Manual

Search results

Summary of Contents for KINO-690AM2

Reviews:

Brands by name

Popular brands