manualshive.com logo in svg

IEI Technology KINO-690AM2, User Manual

Share
Download
IEI Technology KINO-690AM2 User Manual Download Page 158

 

KINO-690AM2 Mini-ITX Motherboard

 

BIOS Menu 17:NorthBridge Chipset Configuration 

 

The NorthBridge Chipset configuration menu has no configurable options. The 

NorthBridge Chipset configuration menu shows the following Northbridge chipset settings: 

 

Memory CLK

:   Shows the speed of the memory controller 

 

CAS (Latency)

: Specifies the Column Address Strobe (CAS) delay time 

 

RAS/CAS Delay(Trcd): 

Specifies the number of clock cycles that must elapse 

between sending a RAS (row address strobe) signal and the CAS (column 

address strobe) signal. 

 

Min Active RAS (Tras)

: Specifies the speed at which the RAM terminates the 

access of one row and start accessing another. 

 

Row Precharge Time(Trp)

: Specifies the length of the delay between the 

activation and precharge commands for the RAS signal. 

 

RAS/RAS Delay(Trrd)

 

 

Row Cycle (Trc)

 

 

Asynchronous Latency

 

 

 

Page 138 

Summary of Contents for KINO-690AM2



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands