IEI Technology KINO-690AM2 User Manual Download Page 132

Page: 132 / 226

KINO-690AM2 Mini-ITX Motherboard

UDMA1

Ultra DMA mode 0 selected with a maximum data transfer

rate of 16.6MBps

UDMA1

Ultra DMA mode 1 selected with a maximum data transfer

rate of 25MBps

UDMA2

Ultra DMA mode 2 selected with a maximum data transfer

rate of 33.3MBps

UDMA3

Ultra DMA mode 3 selected with a maximum data transfer

rate of 44MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA4

Ultra DMA mode 4 selected with a maximum data transfer

rate of 66.6MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA5

Ultra DMA mode 5 selected with a maximum data transfer

rate of 99.9MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Page 112

Summary of Contents for KINO-690AM2



































































































































































































































Search results

Summary of Contents for KINO-690AM2

Reviews:

Brands by name

Popular brands

IEI Technology KINO-690AM2, User Manual

Search results

Summary of Contents for KINO-690AM2

Reviews:

Brands by name

Popular brands