IEI Technology KINO-690AM2, User Manual

Page: 111 / 226

KINO-690AM2 Mini-ITX Motherboard
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding KINO-690AM2 external peripheral interface connector
making sure the pins are properly aligned.
5.8.1 Audio Connection
Audio signals are interfaced through two phone jack connections. The red phone jack is
for Mic In and green is for Speaker Out. Follow the steps below to connect audio devices
to the KINO-690AM2.
Step 1: Locate the audio phone jacks . The location of the audio phone jacks are
shown in Chapter 3 .
Step 2: Insert audio phone jack plugs . Insert audio phone jack plugs into the audio
phone jacks on the external peripheral interface. See Figure 5-14 . Step 0:
Figure 5-14: Audio Connectors
5.8.2 DVI Display Device Connection
The KINO-690AM2 has a single female DVI connector on the external peripheral interface
panel. The DVI connector is connected to a digital display device. To connect a digital
display device to the KINO-690AM2, please follow the instructions below.
Step 1: Locate the DVI connector . The location of the DVI connector is shown in
Page 91