IEI Technology IVS-300-BT-J1/4G, User Manual

Page: 53 / 110

IVS-300 Embedded System
Page 39
o
Automatically Switch SIM Card : check to allow the system to ping URL1
and URL2 every 30 seconds. If the system is unable to ping both URLs in
three minutes, the system will automatically switch to the other SIM card.

Network Connection :
o
Status : shows the connection status. Click the Connect button to
connect the selected SIM card to network.
o
Auto Reconnect : allows the system to reconnect automatically.
o
Dial number : provided by the ISP for mobile network. The default value is
*99# .
o
APN (Access Point Name): provided by the ISP for mobile network. The
default value is internet .
o
Connect result : displays the connection result.
3.14 RAID Configuration (ULT3 Model Only)
The IVS-300-ULT3-i5 can provide data protection for serial ATA (SATA) disks via the
Intel® Rapid Storage Technology. To access the Intel
®
Rapid Storage Technology, please
follow the steps below.
WARNING!
Irrecoverable data loss occurs if a working drive is removed when
trying to remove a failed drive. It is strongly recommended to mark the
physical connections of all SATA disk drives. Drive locations can be
identified by attaching stickers to the drive bays. If a drive member of a
RAID array should fail, the failed drive can then be correctly identified.
CAUTION!
Do not accidentally disconnect the SATA drive cables. Carefully route
the cables within the chassis to avoid system down time.